Repairing the linkage in a sink typically involves addressing issues with the sink stopper or pop-up assembly. Here's a general guide:
Clear the Area:
Ensure there's no standing water in the sink. If needed, use a bucket or towels to remove excess water.
Access the Linkage:
Under the sink, locate the linkage connecting the lift rod to the stopper or pop-up assembly.
Inspect for Debris:
Check for any debris or hair that might be causing the linkage to jam. Clean out any blockages.
Adjustment and Tightening:
Sometimes, the linkage may be misaligned. Adjust the connections and tighten any loose nuts or screws.
Replace Worn Parts:
If parts of the linkage are damaged or worn, consider replacing them. Common parts include the pivot rod, clevis strap, and pop-up assembly.
Lubrication:
Apply a small amount of silicone-based lubricant to moving parts for smoother operation.
Reassemble:
Put everything back together in the reverse order of disassembly, ensuring a secure connection.
Test the Sink:
Test the sink by operating the lift rod or lever to check if the stopper or pop-up moves freely.
No comments:
Post a Comment